Aircraft Painter (M20AI4) (37509019)

Job Description

• Description:
• General StatementResponsible for the spray application of multiple aerospace paints on avariety of substrates and on simple to complex product configurations,including the set up and application of primers and finish coat.Supporting responsibilities include masking, racking, turning, andsanding operations as well as equipment maintenance and paint mixingoperations.  Qualifications include being able to read engineeringblueprints, schematics and drawings. Can match or detect differencesamong colors, including shades of color and brightness. Able to remainsteady while moving an arm or while holding arm and hand in position.See details at close range. Make precise movements of the fingers tograsp, manipulate or assemble small objects. Able to quickly move hand,hand with arm or two hands to grasp, manipulate or assemble objects.Tasks include mix paints to match color specifications or originalcolors, using spatulas or power mixing equipment to stir or thin paints.Select and apply paint according to engineering planning documents.Dispose of trash, scrap and hazardous waste in an appropriatemanner. Remove grease, dirt, paint, or rust from surfaces usingabrasives, solvents, and brushes or washing tanks to prepare to applypaint. Spray or brush prepared surfaces with specified amounts ofalodine, primers or finish coatings per engineering planning. Mixingredients to create specific finishes. Trim excess material. Use anyequipment (e.g., computers or hand, power and air tools)needed to complete paint assignments. Perform any pickup, rework andincorporation of changes to the product as required. Work from prints,sketches, specifications and written/verbal instruction. Maintainrequired certifications, qualifications, licenses or permits. Utilizeprecision measuring equipment (e.g. isoscopes and scales) to performself-inspection of in-process and finished work. Perform routine minormaintenance on sprayers, paint guns, etc. as part of the daily workduties. Move product within the manufacturing work area of the shop,including across aisles, using assigned equipment and completetransactions necessary to move product to the next operation. Supportthe continuous flow of product within the manufacturing process bytraining and assisting employees of the same or lower classificationlevel. Inspect equipment, structures, or materials to identify the causeof errors or other problems or defects. Analyze information and evaluateresults to choose the best solution and solve problems as pertains tothe paint process. Ensure daily logs are completed for air quality priorto paint operations. Utilize required safety equipment and proceduressuch as respirators, air hoods/masks, Tyvek suits, gloves, donning/doffing, foot wear and safety eyewear. Compliance with governingregulations including but not limited to BAC, OSHA and customerspecifications.Level AI4Employee is able to perform the critical functions of the painttechnician such as locate application areas per the engineering p
•  
• Skills:  
• 3-5 years of Aircraft painter experience
• Spray applications, primer coats, final top coat finishes are some of the requirements
• Able to apply primers, stenciling finishes, clear coat and top coat gloss finish to composite and metallic surfaces
• Supporting responsibilities include masking, scuffing, cleaning and sanding operations as well as equipment maintenance and paint mixing operations
• 3rd shift, starts at 11 PM, OT is available
• Must be able to complete respirator certifications and basic painter skill test
• Duration is 3 months with possible extension and manager is open to direct conversion for the right worker
• Testing Details are as follows:
• SAF327T - Respiratory Protection - Air Supplied Painter Hood, Recert
• SAF322P - Respiratory Protection - Medium Size, Half-Face, Two-Cartridge Respirator Recertify
• SAF325P - Respiratory Protection - Medium Size, Full-Face, Two-Cartridge Respirator Recertify
• SAF326P - Respiratory Protection - Full-Face, Air-Supplied Respirator Recertify
• MED800 Hexavalent Chromium Medical Surveillance
• SAF003W - Hexavalent Chrome Regulated Area

Job Requirements

Aircraft Painting, Spray Application, Primer Application, Finish Coat Application, Masking, Racking, Turning, Sanding, Equipment Maintenance, Paint Mixing, Blueprint Reading, Schematic Reading, Drawing Reading, Color Matching, Color Discrimination, Surface Preparation, Alodine Application, Stenciling, Clear Coat Application, Top Coat Gloss Finish, Paint Selection, Hazardous Waste Disposal, Trim Excess Material, Hand Tool Usage, Power Tool Usage, Air Tool Usage, Computer Usage, Rework, Precision Measuring Equipment, Isoscope Usage, Scale Usage, Self-Inspection, Sprayer Maintenance, Paint Gun Maintenance, Material Handling, Employee Training, Equipment Inspection, Problem Solving, Air Quality Logging, Safety Equipment Usage, OSHA Compliance, BAC Compliance, Customer Specification Compliance, Respirator Certification, Basic Painter Skills, Composite Surface Painting, Metallic Surface Painting, Scuffing, Cleaning

About Company

null

Apply for this Job